Description
Enclosed 5-axis machining centre
The LINK 6.000 is the large-format enclosed 5-axis machining centre in the BERMAQ LINK series. With a working area of 6,000 x 1,900 x 1,000 mm and a 15 kW head, it performs high-speed milling of technical plastics, thermoformed parts, composites, resins and non-ferrous materials.
Its robust moving bridge delivers speed, accuracy and high-quality finishes, while the full enclosure isolates the moving parts and protects both operator and surroundings from noise, dust and fumes.
Technical characteristics LINK 6.000
5
Encabinada
6.000 x 1.900 x 1.000 mm (X,Y,Z)
15 kW
12,000 rpm
24,000 rpm
❌
Linial of 8 positions
Yes
Table for mechanical clamping
Applications of the LINK 6.000 milling machine
Trimming thermoformed parts and moulds in a closed environment
The LINK 6.000 is focused on large-format parts with 3D geometry, in sectors where process accuracy and cleanliness matter as much as speed:
Thermoforming: 5-axis trimming of thermoformed plastic parts and their derivatives.
Automotive: moulds, patterns and components in aluminium, composites and light alloys.
Aeronautics: trimming of structural components and machining of carbon fibre.
Moulds and dies: patterns and moulds in resins, aluminium and composite materials.
Architecture, interior design and furniture: parts in technical plastics, wood and composites up to 6 metres long.
Performance of the LINK 6.000 machining centre
5-axis kinematics with Harmonic Drive on the C and A axes
The C and A rotary axes, with ranges of +/-200º and +/-120º, are driven by Harmonic Drive transmission at 9,000º/min. The X and Y axes reach 50 m/min and the Z axis 20 m/min, dynamics designed for continuous 3D toolpaths over large surfaces.
Liquid-cooled 15 kW electrospindle with HSK-E40 taper
The 15 kW milling motor runs at a nominal 12,000 rpm and reaches 24,000 rpm. Liquid cooling maintains thermal stability over long cycles, and the HSK-E40 taper ensures rigid, accurate tool clamping.
Three magazines on the bridge: 24 tools within reach of the head
Three 8-position linear magazines built into the Y-axis bridge provide 24 positions. Because they travel with the bridge, tool changes are fast and safe at any point of the table, without interrupting machining.
Siemens Sinumerik One and automatic tool setter
The Siemens Sinumerik One CNC manages 5-axis interpolation with accuracy and performance, while the tool setter automates length measurement at every change.
Enclosed design of the LINK 6.000 milling machine
Full enclosure against noise, dust and fumes
The fully closed structure isolates all moving parts. The result is greater operator safety, better dust containment and a cleaner, quieter working space, ideal for demanding industrial environments.
Two working zones separated by a movable partition
A movable central partition lets you use the full table length for parts up to 6,000 mm or split it into two independent areas to suit production.
Robust moving bridge for six metres of travel
The moving-bridge structure ensures high working speed and finish quality, with a compact footprint for its capacity. The table is prepared for mechanical clamping of parts.
Configure the LINK 6.000 for your production
Working modes and equipment of the 6-metre version
Working area: full 6,000 mm table or two zones separated by the movable partition.
Tool magazine: up to three 8-position linear magazines on the bridge, with 24 tools in total.
Clamping: table for mechanical clamping, adaptable to the fixtures of each part.
LINK series: compact models with 2,000 and 4,000 mm length when the part does not need six metres.
Comparative table
Ask for budget
Materials compatible with the LINK 6.000 milling machine
Technical plastics, composites and light alloys with a precision finish
Technical plastics and acrylics: clean milling and trimming of technical and thermoformed parts.
Composites and carbon fibre: trimming of structural components with dust contained inside the enclosure.
Aluminium and light alloys: moulds, patterns and parts for automotive and aeronautics.
Resins: 3D-machined patterns and moulds with good surface quality.
Wood and polystyrene: patterns, prototypes and long elements.
The LINK 6.000 compared with the compact LINK models
The LINK series groups together BERMAQ's enclosed high-speed CNC milling machines. The compact models work with lengths of 2,000 or 4,000 mm; the LINK 6.000 takes the enclosed concept to large format, with 6,000 mm of X travel, 1,000 mm in Z, three tool magazines and the option of splitting the area into two zones.
Designed for thermoformers, mould makers and automotive suppliers
It is the right machine for companies that need to trim and machine long parts on 5 axes without giving up a clean, safe environment: thermoformers, mould and die shops, automotive and aeronautical suppliers, and manufacturers of components for architecture and interior design.
BERMAQ manufacturing, ISO 230-2 verification and after-sales service
The LINK 6.000 is manufactured by BERMAQ entirely in Spain with EU parts and verified with accuracy checks in accordance with ISO 230-2:2014. BERMAQ supports every installation with online or on-site training, a network of specialised technicians working locally and globally, original spare parts in stock and preventive maintenance packages to keep the machine performing at its best.
Get news, updates and promotions straight to your inbox.
WORLDMAQ-3 S.L.
Crta. Moli del Castell S/N
Avià 08610 (Barcelona) ESPAÑA
Telf: +34 93 823 1060
Customer service
Monday to Thursday: 07:00-17:00 CET
Friday: 07:00-14:00 CET
For urgent technical service, please send e-mail to
bermaq@bermaq.com
«Financiado por la Unión Europea - NextGenerationEU»
